ProAc is a British company that specializes in producing high-quality speakers for audiophiles around the world. The company was founded in 1979 and has since built a strong reputation in the audio world. ProAc’s speakers are known for their clear and natural sound quality, created through the use of high-quality materials and innovative technologies.
Focus on quality and design
ProAc’s loudspeakers are appreciated for their transparent sound reproduction and dynamic range. The company has paid great attention to the design and construction of the speakers to ensure the best performance. All speakers are handcrafted and checked to ensure that the quality and consistency of sound is always at the highest level.
Incredible sound experience
ProAc is a company dedicated entirely to developing and producing high-quality speakers for the most demanding audiophiles. The company uses only the finest materials and innovative technologies to create a clear and natural sound that brings the emotion and character of the music to life.
Enter the world of ProAc: high-quality audio equipment with incredible performance and design
ProAc is one of the few companies in the history of high-end high fidelity that has consistently developed and manufactured high-quality products. The company is known for its reassuringly expensive range of high-quality speakers that are acclaimed by thousands of audiophiles worldwide.
Each ProAc speaker is handcrafted by engineers responsible for each one, from the flagship Response models to the tiny Tablette. The build quality is unsurpassed, each cabinet meticulously built, cushioned and finished with real wood veneers in several standard finishes such as Maple, Bird’s Eye Maple, Cherry, Black Ash, Mahogany, Oak and Silk White. High-gloss versions are also available upon request. The fabric front is of acoustically transparent Crimplene fabric.
ProAc uses only the very best components in its speakers, with each new model reflecting the latest in technology. In fact, many models now feature dedicated drivers with ProAc’s proprietary frame, cone and magnet construction. Driver performance is perfected by costly and sophisticated change filters. But the very best cabinets and components are worthless without an inspired design. Stewart Tyler, Chairman and Chief Designer, has for twenty-five years been responsible for designing the cabinet size and configuration, driver arrangement and crossover design and all the other factors that combine to create one of the most sophisticated sound forms in the modern audio world.
ProAc loudspeakers are available through a network of expert dealers who are not only happy to show off the models’ performance, but also offer sound advice on matching equipment. If you think you’ve already heard the best, go listen to a ProAc. Experience the power of their high-quality speakers and enjoy an unparalleled listening experience.
The ProAc products in a row
ProAc Tablette 10
The ProAc Tablette 10 is the tenth generation of the Tablette series since 1979. This monitor speaker is a new design that allows it to be placed against the wall unlike speakers with a bass port.
- Nominal impedance: 10 ohms
- Recommended amplifiers: 5 to 50 watts
- Frequency response: 55Hz to 30kHz
- Sensitivity: 86dB linear for 1 watt at 1 meter distance
- Bass/Mid: Dynamic bass and transparent mids. ProAc 5″ Paganni Mika cone with acoustic coating
- Tweeter: ProAc exclusive 25 mm soft silk dome, air-cooled and heavy internal damping
- Crossover: For crossover, the finest components are used on a specially designed circuit board in sealed housing. Multi-core oxygen-free copper cable. Connections for optional bi-wiring and bi-amping
- Dimensions: 305 mm high, 191 mm wide, 159 mm deep
- Weight: 11 kg each
- Placement: On stand or can be placed loose on cabinet shelf. Placement against the wall.
Studio Monitor SM100
The ProAc studio 100 was produced for more than 20 years until 2013. The Studio 100 quickly became a favorite in studios, used as a monitor.
Stewart Tyler has been working on a new speaker called the ProAc SM100 and all the components, bass speaker and tweeter have been improved while the enclosure has remained the same.
The SM100 also features a new crossover, the overall sound quality is similar to the studio 100, but a slightly more pleasant sound makes it ideal for long listening sessions in both studio and home situations.
- Nominal impedance: 8 ohms
- Recommended amplifiers: 30 to 150 watts
- Frequency response: 35Hz to 30kHz
- Sensitivity: 88dB linear for 1 watt at 1 meter distance
- Low / middle: 165mm speaker, specially treated cone with acoustic coating and new type of rubber which improves the load capacity and for long life
- Tweeter: ProAc exclusive soft silk dome with special front plate and roll surround against distortion
- Crossover: For the internal crossover, the finest components are used on a specially designed circuit board in sealed housing. Multi-core oxygen-free copper cable. Split for optional bi-wiring and bi-amping
- Dimensions: 406 mm high, 203 mm wide, 254 mm deep
- Weight: 12 kg each
- Placement: On stand. The SM100 has been improved on all fronts for both studio and home use
- Finish: Available in real wood veneer: cherry and Black Ash.
ProAc Centre Voice
The new ProAc center speaker is designed to reproduce natural speech and sound quality in the center channel a home theater system.
- Nominal impedance: 4 ohms
- Recommended amplifiers: 10 to 100 watts
- Frequency range: 50Hz to 30kHz, wide bandwidth and power for home theater use, both voices and music can be reproduced with stunning accuracy
- Sensitivity: 88dB linear for 1 watt at 1 meter distance
- Low/Mid: ProAc Centre Voice uses two brand new bass speakers similar to those in the Tablette 10, 127mm speaker, ProAc 5″ Paganni Mika cone with acoustic coating
- Tweeter: ProAc exclusive 25 mm silk soft dome, air-cooled and heavy internal damping
- Crossover: For the crossover, the finest components are used on a specially designed circuit board in sealed housing. Multi-core oxygen-free copper cable. Connections for bi-wiring and bi-amping
- Dimensions: 432 mm high, 191 mm wide, 204 mm deep
- Weight: 10 kg
- Placement: On stand or can be placed loose on cabinet shelf.
Response DB3
The DB3 monitor loudspeaker with High End quality is available at an affordable price. Small quality speakers are very popular these days. Despite its size, the Response DB3 has excellent bass response through the use of a bass port on the back of the speaker.
- Nominal impedance: 8 ohms
- Recommended amplifiers: 20 to 100 watts
- Frequency range: 38Hz to 30kHz
- Sensitivity: 88dB linear at 1 watt at 1 meter distance
- Low/mid: ProAc Response DB3, 127mm speaker, ProAc 5″ Mikapulp cone with transparent dust cover
- Tweeter: The well-known ProAc 25 mm silk soft dome, very straight frequency response
- Crossover: The finest components are used for the crossover on a specially designed circuit board. Multi-core oxygen-free copper cable. Connections for bi-wiring and bi-amping
- Dimensions: 432 mm high, 191 mm wide, 204 mm deep
- Weight: 8.8 kg each
- Placement: On stand.
Response DB1
The DB1 sounds much larger than it physically is and you might expect from a speaker with a relatively small enclosure. The ProAc newly designed long-stroke woofer allows the soundstage to rival large floorstanding speakers in bass reproduction.
- Nominal impedance: 8 ohms
- Recommended amplifiers: 20 to 100 watts
- Frequency range: 35Hz to 30kHz
- Sensitivity: 88dB linear at 1 watt at 1 meter distance
- Low / middle: ProAc 5″ Mikapulp cone and acrylic phase plug
- Tweeter: Special air-cooled ProAc 25 mm silk soft dome
- Crossover: The finest components are used for the crossover on a specially designed circuit board. Multi-core oxygen-free copper cable. Connections for bi-wiring and bi-amping
- Dimensions: 320 mm high, 182 mm wide, 280 mm deep
- Weight: 8.8 kg each
- Placement: On stand.
Response D2
ProAc is known for producing compact High End loudspeakers such as the Tablette and the Response D2 that are now iconic.
- Nominal impedance: 8 ohms
- Recommended amplifiers: 30 to 150 watts
- Frequency range: 30Hz to 30kHz
- Sensitivity: 88dB linear at 1 watt at 1 meter distance
- Low / middle: ProAc 165 mm with Excel Magnet system fiberglass cone and copper phase plug
- Tweeter: Special air-cooled ProAc 25 mm silk mirror drive soft dome
- Crossover: HQ network using the finest components with options for bi-wiring and bi-amping. Multi-core oxygen-free copper cable.
- Dimensions: 430 mm high, 203 mm wide, 260 mm deep including the 12 mm cloth front
- Weight: 11 kg each
- Placement: On sturdy tall stands.
Response DT8
This ProAc Response DT8 is a new speaker design with two bass/mid-range units made of different cone material; Polypropylene and Pulp Mica. This is the first ProAc loudspeaker to use these two different cone materials making the sound exceptionally balanced. The silk-manufactured ProAc Dome tweeter is positioned asymmetrically between both bass/mid units.
This DT8 is available in all current versions.
- Nominal impedance: 4 ohms
- Recommended amplifiers: 20 to 180 watts
- Frequency response: 38Hz to 30kHz
- Sensitivity: 90dB linear for 1 watt at 1 meter distance
- Low/Mid: 2x 6.5-inch units with different cone material
- Tweeter: ProAc exclusive 25 mm soft silk dome, air-cooled and heavy internal damping
- Crossover: special crossover designed for 2 different mid/bass units
- Dimensions: 978 mm high, 193 mm wide, 229 mm deep
- Weight: 24 kg each
- Model : Floor Stand
Response D20R
Successor to the most successful ProAc D18 loudspeaker but with the ProAc ribbon tweeter also used in the D30, D40 and K6 models. The result is a very open and dynamic sound.
- Nominal impedance: 8 ohms
- Recommended amplifiers: 20 to 180 watts
- Frequency range: 28Hz to 33kHz
- Sensitivity: 88.5dB linear at 1 watt at 1 meter distance
- Low/Mid: ProAc 165 mm with Excel Magnet system, fiberglass cone and unique damped acrylic phase plug
- Tweeter: ProAc 60 mm x 10 mm ribbon as light as a feather and internal damping
- Crossover: Crossover using the finest components on a specially designed circuit board. Multi-core oxygen-free copper cable. Connections with options for bi-wiring and bi-amping
- Dimensions: 960 mm high, 190 mm wide, 229 mm
- Weight: 26 kg each
- Placement: floor standing.
Response D30RS/DS
The D30 offers fast dynamic bass, uncolored mids and highly detailed highs with both the ribbon and dome tweeter.
- Nominal impedance: 8 ohms
- Recommended amplifiers: 10 to 200 watts
- Frequency range: 20Hz to 30kHz
- Sensitivity: 89dB linear at 1 watt at 1 meter distance
- Low / mid: ProAc 165 mm unit equipped with an acoustically damped fiberglass cone with coating and phase plug
- Tweeter D30DS: Special air-cooled ProAc 25 mm silk soft dome
- Tweeter D30RS: ProAc 60 mm x 10 mm ribbon as light as a feather and internal damping
- Crossover: HQC network using the finest components on a specially designed circuit board. Multi-core oxygen-free copper cable. Connections with options for bi-wiring and bi-amping
- Dimensions: 1041 mm high, 266 mm wide, 311 mm
- Weight: 27 kg each
- Placement: floor standing.
Response D48D/R
Where the D30 is a perfect speaker, the top-of-the-line D48 model goes the extra mile with two woofers. This makes the D48 capable of delivering lifelike sound even in very large listening rooms.
- Nominal impedance: 4 ohms
- Recommended amplifiers: 10 to 250 watts
- Frequency range: 20Hz to 30kHz
- Sensitivity: 90dB linear at 1 watt at 1 meter distance
- Low/mid: ProAc 165 mm studio monitor design, units with special
coating and specially tuned dust cover - Tweeter D48D: Special air-cooled ProAc 25 mm silk soft dome
- Tweeter D30RS: ProAc 60 mm x 10 mm ribbon as light as a feather and internal damping
- Crossover: HQC network using the finest components on a specially designed circuit board. Multi-core oxygen-free copper cable. Connections with options for bi-wiring and bi-amping
- Dimensions: 1200 mm high, 212 mm wide, 340 mm
- Weight: 39 kg each
- Placement: floor standing.
Response K6
The K6 and and the K8 are uncompromisingly designed and executed with the K6 using 2 pieces of 6″ woofers and the K8 using 2 pieces of 8″ woofers.
- Nominal impedance: 4 ohms
- Recommended amplifiers: 10 to 250 watts
- Frequency range: 25Hz to 30kHz
- Sensitivity: 90dB linear at 1 watt at 1 meter distance
- Low: 2 x ProAc 165 mm professional studio monitor, units with polymer
impregnated kevlar cones - Center: ProAc 50 mm soft dome with a CNC milled 6061 front plate with aluminum alloy and air coupling
- Tweeter: ProAc ribbon with diaphragm, light as a feather and internal damping
- Crossover: Crossover using the finest components on a specially designed circuit board. Multi-core oxygen-free copper cable. Connections with options for bi-wiring and bi-amping
- Dimensions: 1185 mm high, 215 mm wide, 340 mm
- Weight: 44 kg each
- Placement: floor standing.
Response K8
- Nominal impedance: 4 ohms
- Recommended amplifiers: 10 to 500 watts
- Frequency range: 20Hz to 30kHz
- Sensitivity: 91.5dB linear at 1 watt at 1 meter distance
- Low: 2 x ProAc 200 mm professional studio monitor, units with pure polymer, impregnated and polished kevlar cone lacquered
and concentric weighting - Center: new ProAc 75 mm soft dome billet of aluminum with horn for wide dispersion area
- Tweeter: ProAc ribbon with diaphragm, light as a feather, Alnico magnet and internal damping
- Crossover: Crossover using the finest components on a specially designed circuit board. Multi-core oxygen-free copper cable. Connections with options for bi-wiring and bi-amping
- Dimensions: 1230 mm high with spikes, 240 mm wide, 450 mm
- Weight: 70 kg each
- Placement: floor standing.